Countertop Rinser Specifications

John Buckman
John Buckman
Last updated 
Here are the specifications of our countertop pitcher rinser:
https://decentespresso.com/rinser



flow rate of the rinser

The pump we are using is rated at 1.0GPM (3.8LPM [liters per minute]) 
pump.png 892 KB View full-size Download

pump fittings model 613 KB View full-size Download
pump specication model we are using 119 KB View full-size Download



  • inner and outer diameter of the two tubes, and the material used
These are the silicone tubes that are used for intake and drainage and the standard size is at 1meter. 

Also, there are two short silicone tubes on the inside of the box rinser that are very short and the one for drainage is clear inside with slightly different dimensions than the black one that continues outside. 

A longer length of tubing at 5M is also available.



  • material of the case

AL1010 Aluminum 79.9 KB View full-size Download
The frame box is made of 3 separate aluminum sheets and includes 6pc rivet nut preinstalled for mounting together the frame and painted fine black powder with silk screen logo print. 


easyeda_CENxNrI509.png 101 KB View full-size Download

The PCB is very simple but it helps to arrange the connections between the pump and power connector and ON-OFF switch


  • size of the rinser itself in cm height / width / depth

rinser dimesions 457 KB View full-size Download

  • material of the rinser itself
bottom draining tray 204 KB View full-size Download
The bottom part of the rinser is made out of Stainless steel SS 304.

  • material of the rinser cover 
top draining tray 183 KB View full-size Download
The top cover is made out of SS 304.

The sprinkler itself is made out of a few components 
sprinkler 1.1 MB View full-size Download


The drain screw is made out of SS304 and is 18mm precut with a 15mm⌀ Barb Elbow SS304 Fitting